How To Add Person To Photo In Photoshop

Download Article

Sometimes, y'all can end up with pictures that are virtually perfect except they are missing one person you really want in them. Instead of trying to go everyone back in the same identify to recreate the picture with all the people you want, yous tin can add them to your motion-picture show using a photo editor such as Adobe Photoshop. If y'all follow a few steps, you can add a person to a photograph in no fourth dimension.

1
Pick your photos. When yous are trying to add together a person to a picture, y'all want to make sure that you take a picture of the absent person that matches the photo you desire to add them to. For example, if you want to add your all-time friend to a pic of a group of friends on the beach, don't endeavour to utilise a picture of her in a Christmas sweater. Information technology won't look correct and people will be able to tell that y'all manipulated the photo.
- If you can find a pic where your friend is on a uncomplicated or uncomplicated background, that would be ideal. The busier the background, the more work you'll accept to do when y'all erase it later.
- You want the motion-picture show of the person you are calculation to be as large or bigger than the one you want to add together them to. If you lot accept to enlarge the person you are adding, they will become pixelated and give away your hard work to make them wait like they belong in the picture.
- Also try to lucifer color tone and lighting. If you are all on a embankment, try to find i of your friend in the sun. You can dispense the colors afterward, but it will be harder for you lot to piece of work with later.^[1]
2
Select the person. Y'all need to open up upward the photo of the figure y'all are cut out in Photoshop. Pick the lasso tool from your toolbar. It will be the icon that looks similar a lassoed rope that is the tertiary icon downwards from the elevation of the side toolbar. Commencement from a place near your figure and, holding downwards your left mouse central, loop around your figure. Once you get all the style effectually the person, the lines yous drew volition get highlight lines, which are dashed, moving lines effectually the edges you drew.
- You don't have to be super precise, only make sure y'all don't accidentally cutting off part of their body. The actress groundwork that y'all grab will be erased later. ^[2] ^[3]
Advertisement
3
Copy and paste the figure. At present that your figure is highlighted, you need to copy the figure and then yous can paste it over into the group photograph. Click on the Edit menu option at the top of the screen. From the pull downwardly menu, click Copy. Now, yous need to open up your group photo. One time it is open, click on the flick. Then, go support to the Edit menu and choose Paste from the pull down card. This will paste your highlighted figured from the original prototype into the grouping image.
- Instead of using the menu bar, y'all tin also hit the control (or command on a Mac) button and the C button. This will re-create the epitome likewise. To paste, only click command (or control) and V.^[4] ^[five]
four
Resize the figure. Now that your figure is in your image, you demand to resize it to make it match the people in the group. To do this, yous will employ the Free Transform tool. Make sure the figure layer is selected, which you tin can do from the Layer window, which is typically on the right side of your piece of work space. Once the figure layer is chosen, go to the Edit menu option and choose Free Transform. A box volition announced on the exterior of your layer. Holding down the shift key, click your mouse on the corner of the box and pull the box in, making the effigy smaller. Proceed shrinking until the figure looks well-nigh the aforementioned size as the people in the grouping photograph.
- Brand sure you hold down the shift primal. It will prevent you from irresolute the proportions of the figure in the picture.
- Instead of clicking the menu bar, you tin click control (or command) and the T button to use the Free Transform tool.^{[half dozen]} ^[7]
v
Erase the extra background. To make the figure look similar she belongs in the paradigm, you demand to erase the original groundwork from around the figure. To do this, you lot will need the eraser tool. To begin, click on the effigy layer from the layer window. At the bottom of the layer window, in that location is a push with a grey rectangle with a white circumvolve in the eye chosen the mask layer push button. Click on this to isolate the image from the other layers. Now, click on the eraser tool on the toolbar on the left, which is near halfway downwards the bar and has a rectangular eraser on it. From the top of the screen, there are eraser options. Click the down arrow and change the size of the brush to something around threescore or seventy pixels by sliding the pointer over or typing in the new size. Also change the hardness at the bottom of the menu to 0. Now you can erase most of the extra background around your effigy.
- Go shut to the figure only don't erase whatever part of the effigy. The extra $.25 left around their body will be erased with a smaller brush.
- If they are on a white or solid color background, you can employ the magic wand tool to isolate the background and delete it. Just click the magic wand tool, select the color of the background, and and so press delete once it is all highlighted.^[8] ^[ix]
6
Cease isolating the effigy. Now that the majority of the groundwork is erased, you need stop removing all the excess background to isolate the figure. In your eraser options as the top, change the size of your brush to something between twenty and 30 pixels. You also need to change the hardness to at least l. Once your eraser is done, zoom in on the picture by hitting the plus sign or changing the percentage on the bottom of your window. Get as close as you can, making the edges of the figure like shooting fish in a barrel to encounter. Erase the residual of the background from the figure.^[ten] ^[xi]
- If yous mess up or accidentally erase part of the effigy, you lot can merely press the disengage button under Edit on the bill of fare bar.

1

Move the layer. Now that your figure is the aforementioned size as the rest of the group and is isolated, you need to move the layer to the position y'all want them to be in. To do this, make certain the figure layer is selected. Click the move tool, which is the one on the top of the toolbar on the left side of the screen. One time yous click it, take hold of your figure layer and concur down the left mouse button while you elevate it to the place you want information technology.^[12]
2
Change the lighting. At present that the figure is the same size as the others, you need to match the color of them. With the figure layer selected, click on the icon abreast the mask button on the bottom of the layer screen. It has a bi-color circle on it. When you click it, a menu screen will pop up. Click on the Curves option, which will make a dialog window pop up. It will have a square with a diagonal line through the middle of information technology. Click on the line in the middle, halfway upwards from the center, and halfway down from the middle. Each of the dots that announced will allow you lot to move the line. Now you lot need to play with the levels in this option. You can move the lines up and down, adding and subtracting light and contrast equally you go. Play around with the layer until information technology matches the group layer.
- If in that location is only a chip of a different betwixt the layers, you can but alter the brightness and dissimilarity from the Image menu bar. Simply conform the lines back and along.
- You may have a dialog box popular up with you try to make a Curves layer on your figure. When it pops up, press OK to make the Curves mask layer.
- You can also change the lighting of the original group photograph likewise. If yous want to change it, click on the background layer and pick the same icon on the bottom of the screen and follow the same steps every bit with the figure layer until the two layers are close to each other.^[13]
3

Match the color. Now that the lighting is right on your figure, you need to make the hues of their skin friction match. To do this, make sure your figure layer is selected. Press the aforementioned bi-color circle at the bottom of the layer screen and cull Hue/Saturation from the card. From the screen, y'all tin change Hue, Saturation, and Brightness. Hue will change the color the highlight and depression calorie-free colors to a different color. Saturation will modify the concentration of the colors on your, making them brighter or duller. The brightness will change the overall lightness of the figure. You should play effectually with the dials until the figure matches the color of the group.^[fourteen] ^[15] ^[16]

Advertizement

Add New Question

Question

Later adding the person into the photo and clicking "save," the photo is no longer there. How do I save the entire edited file?

You are probably saving it as a Photoshop file instead of an epitome file. Utilise "Salvage As" and make sure yous choose a file type like "JPG" or "PNG." Give it a dissimilar file name from the original file, so you know which one is which.
Question

If someone says they won't be in a portrait, can I photoshop them in?

If they don't want to be in the portrait, inquire them if they would be okay with you adding them in via photoshop. If they don't want you to, respect their wishes.

Enquire a Question

200 characters left

Include your e-mail accost to get a bulletin when this question is answered.

Submit

You can use Photoshop CS, Elements, or any of the other incarnations of Photoshop. If you don't have access to Photoshop, you lot tin can utilize gratuitous programs such as Gimp.

Thanks for submitting a tip for review!

Advert

About This Article

Commodity Summary X

To add people to a photo, endeavour using a programme like Adobe Photoshop to re-create and paste them in. Before you begin, cull two photos that are compatible. For example, if your base photograph is on a beach, you'll want to choose a photo of the person that'south well lit. Open up the image of the person in Photoshop, and select them using the lasso tool. Kickoff at their head and loop the lasso tool around their entire body. Then, click Edit and Re-create to copy their paradigm onto the clipboard. Now, open your group photo and click Edit and Paste to paste them in. Brand sure to resize the added person so they match the size of everyone else. Yous tin can exercise this with the Complimentary Transform tool. If there's whatever original background surrounding the added person, use the Eraser tool to get rid of it. To learn how to adapt the lighting in your photoshopped image, read on!

Did this summary aid you?

Thanks to all authors for creating a page that has been read 437,055 times.

Did this article help you?